Offshore robust wind turbine aviation lights. Compliant to your overseas territory.
Contarnex, Established 1960 - Protecting the Aviation Industry & Worldwide Skylines
Skyscrapers
Tall Buildings
Bridges
Tower Cranes
Infrared
Wind Turbines
Telecom and Met Masts
Radar Towers
Air Traffic Control Towers
Compliance & Services
Aircraft Warning Lights for Wind Turbines
CEL infrared aviation lighting for onshore Wind Turbines. MOD compliant lighting for RAF low level flying for accident avoidance. Make your wind turbine structure visible with approved infrared lighting for use with military issue Night Vision Goggles. Value engineered European made LED based lighting and controllers for monitoring by BMS and GSM.
HIGH INTENSITY LIGHTING TYPE A
CEL-HI-200-ACWGAM
Robust Intelligent White High Intensity Lights are fully compliant to ICAO, EASA, DIO and FAA.
Marine grade lights offer built-in Modbus intelligent network integration, GPS, photocell & flasher modes, fault monitoring etc
More Information
CEL-HI-200-ACWGAM High Intensity Light
Key Features:
2,000cd (effective) RED fixed or flashing – Supports both stand-alone and Modbus operations – Suitable for offshore use – Marine Grade with A316 end parts – Extremely reliable – design lifetime 20 years – 5 year warranty – longest in the industry – Luminosity adjustable 10, 30 and 100%
Specifications met:
ICAO, EASA, FAA, DIO – verified Qinetiq, Finas, Intertek
Optical characteristics:
– 2,000cd (effective) – Colour aviation RED- Horizontal beam 360°- Vertical beam 3°- Maximum intensity at -1° is less than 1,125cd – Maximum intensity at -10° is less than 75cd
– NVG compliant infrared (850nm) as an option
Electrical characteristics:
Operating voltage 90-265VAC – Constant current PFC – 17W power consumption best in industry
Meets: EMC (Emissions): EN 61000-6-4 – EMC (Immunity): EN 61000-6-2
Mechanical characteristics:
Marine grade aluminium body (C5MHigh) – Degree of protection IP66, Height 347mm, diameter 160mm, Weight 5kg.
Additional Factory-Installed Options:
Cold-climate version (CCV)
Night Vision compliant infrared (IR)
Independent Verification:
Qinetiq, Finas, Aalto University, Nemko
HIGH INTENSITY LIGHTING TYPE B
CEL-HI-100-230-A
Robust Intelligent White High Intensity Lights are fully compliant to ICAO, CAA & EASA.
Marine grade lights offer built-in Modbus intelligent network integration, GPS, photocell & flash modes, fault monitoring etc
More Information
CEL-HI-100-230-A High Intensity Light
Key Features:
100,000cd (effective) WHITE flashing, – Supports both stand-alone and Modbus operations – Suitable for offshore use – Marine Grade with A316 end parts – Extremely reliable – design lifetime 20 years – 5 year warranty – longest in the industry
Specifications met:
ICAO, CAA, EASA – verified Qinetiq, Finas, Intertek
Optical characteristics:
– 100,000cd (effective) day mode, 20,000cd twilight mode, 2,000cd night mode – Colour aviation WHITE – Horizontal beam 360°- Vertical beam 3°-
– NVG compliant infrared (850nm) as an option
Electrical characteristics:
Operating voltage 90-265VAC – Constant current PFC – 200/50/20W power consumption best in industr
Meets: EMC (Emissions): EN 61000-6-4 – EMC (Immunity): EN 61000-6-2
Mechanical characteristics:
Marine grade aluminium body (C5MHigh) – Degree of protection IP66, Height 426mm, diameter 364mm, Weight 27kg.
Additional Factory-Installed Options:
Cold-climate version (CCV)
Night Vision compliant infrared (IR)
Independent Verification:
Qinetiq, Finas, Aalto University, Nemko
MEDIUM INTENSITY LIGHTING TYPE A
CEL-MID-ACWGAM
Robust Intelligent White/Red Medium Intensity Lights are fully compliant to ICAO, EASA, DIO and FAA.
Marine grade lights offer built-in Modbus intelligent network integration, GPS, photocell & flasher modes, fault monitoring etc
More Information
CEL-MID-ACWGAM Medium Intensity Light
Key Features:
20,000cd (effective) WHITE flashing, RED flash/steady – Supports both stand-alone and Modbus operations – Suitable for offshore use – Marine Grade with A316 end parts – Extremely reliable – design lifetime 20 years – 5 year warranty – longest in the industry
Specifications met:
ICAO, EASA, FAA, DIO – verified Qinetiq, Finas, Intertek
Optical characteristics:
– 20,000cd (effective) – Colour aviation WHITE and RED – Horizontal beam 360°- Vertical beam 3°- Maximum intensity at -1° is less than 11,250cd (WHITE), 1,125cd (RED) – – Maximum intensity at -10° is less than 750cd (WHITE), 75cd (RED)
– NVG compliant infrared (850nm) as an option
Electrical characteristics:
Operating voltage 90-265VAC – Constant current PFC – 19W/17W power consumption best in industry
Meets: EMC (Emissions): EN 61000-6-4 – EMC (Immunity): EN 61000-6-2
Mechanical characteristics:
Marine grade aluminium body (C5MHigh) – Degree of protection IP66, Height 408 mm, diameter 280 mm, Weight 14kg.
Additional Factory-Installed Options:
Cold-climate version (CCV)
Night Vision compliant infrared (IR)
Independent Verification:
Qinetiq, Finas, Aalto University, Nemko
MEDIUM INTENSITY LIGHTING TYPE B/C
CEL-MI-ACWGAM
Robust Intelligent Red Medium Intensity Lights are fully compliant to ICAO, EASA, DIO and FAA.
Marine grade lights offer built-in Modbus intelligent network integration, GPS, photocell & flasher modes, fault monitoring etc
More Information
Key Features:
2,000cd (effective) RED fixed or flashing – Supports both stand-alone and Modbus operations – Suitable for offshore use – Marine Grade with A316 end parts – Extremely reliable – design lifetime 20 years – 5 year warranty – longest in the industry
Specifications met:
ICAO, EASA, FAA, DIO – verified Qinetiq, Finas, Intertek
Optical characteristics:
– 2,000cd (effective) – Colour aviation RED- Horizontal beam 360°- Vertical beam 3°- Maximum intensity at -1° is less than 1,125cd – Maximum intensity at -10° is less than 75cd
– NVG compliant infrared (850nm) as an option
Electrical characteristics:
Operating voltage 90-265VAC – Constant current PFC – 17W power consumption best in industry
Meets: EMC (Emissions): EN 61000-6-4 – EMC (Immunity): EN 61000-6-2
Mechanical characteristics:
Marine grade aluminium body (C5MHigh) – Degree of protection IP66, Height 333mm, diameter 270mm, Weight 11kg.
Additional Factory-Installed Options:
Cold-climate version (CCV)
Night Vision compliant infrared (IR)
Independent Verification:
Qinetiq, Finas, Aalto University, Nemko
CEL-MI-ICAO-AC-2KR-IR
Robust Small Form Intelligent Red Medium Intensity Lights are fully compliant to ICAO, EASA, DIO and FAA.
Marine grade lights offer built-in Modbus intelligent network integration, GPS, photocell & flasher modes, fault monitoring etc
ICAO MEDIUM INTENSITY TYPE B/C
More Information
Key Features:
2,000cd (effective) RED fixed or flashing – Supports both stand-alone and Modbus operations – Suitable for offshore use – Marine Grade with A316 end parts – Extremely reliable – design lifetime 20 years – 5 year warranty – longest in the industry – Luminosity adjustable 10, 30 and 100%
Specifications met:
ICAO, EASA, FAA, DIO – verified Qinetiq, Finas, Intertek
Optical characteristics:
– 2,000cd (effective) – Colour aviation RED- Horizontal beam 360°- Vertical beam 3°- Maximum intensity at -1° is less than 1,125cd – Maximum intensity at -10° is less than 75cd
– NVG compliant infrared (850nm) as an option
Electrical characteristics:
Operating voltage 90-265VAC – Constant current PFC – 17W power consumption best in industry
Meets: EMC (Emissions): EN 61000-6-4 – EMC (Immunity): EN 61000-6-2
Mechanical characteristics:
Marine grade aluminium body (C5MHigh) – Degree of protection IP66, Height 347mm, diameter 160mm, Weight 5kg.
Additional Factory-Installed Options:
Cold-climate version (CCV)
Night Vision compliant infrared (IR)
Independent Verification:
Qinetiq, Finas, Aalto University, Nemko
MOD APPROVED INFRARED 850nm LIGHTING
CEL-IR850-R-24-CST
Military Approved INFRARED and visual RED Aircraft Warning Lighting that are fully compliant to DIO, ICAO, EASA regs.
Marine grade lights offer protection to Wind Turbines, Met Masts and other vertical structures where low level military flights are conducted. Lights approved for use with all military issue Night Vision Goggles.
More Information
Key Features:
850nm infrared wavelength – RED fixed or flashing – controlled by photocell & flasher modes – Suitable for offshore use – Marine Grade with A316 end parts – Extremely reliable – 5yr warranty – longest in the industry.
Specifications met:
ICAO, EASA, FAA, DIO – verified Qinetiq, Finas, Intertek
Optical characteristics:
Colour INFRARED 850nm – Visual RED 40cd – Horizontal beam 360° – Vertical radiation pattern -15° – +30° – Typical intensity 300mW/sr, Peak 600mW/sr
Electrical characteristics:
Operating voltage 24VDC – Constant current PFC – 15W power consumption best in industry
Meets: EMC (Emissions): EN 61000-6-4 – EMC (Immunity): EN 61000-6-2
Mechanical characteristics:
Marine grade aluminium body (C5MHigh) – Degree of protection IP66, Height 200mm, diameter 140mm, Weight inc mounting set 3.4kg.
Independent Verification:
Qinetiq, Finas, Aalto University, Nemko
CEL-IR850-24-CST
Military Approved INFRARED Aircraft Warning Lighting that are fully compliant to DIO regs.
Marine grade lights offer protection to Wind Turbines, Met Masts and other vertical structures where low level military flights are conducted. Lights approved for use with all military issue Night Vision Goggles.
More Information
Key Features:
850nm infrared wavelength – controlled by photocell & flasher modes – Suitable for offshore use – Marine Grade with A316 end parts – Extremely reliable – 5yr warranty – longest in the industry
Specifications met:
DIO – verified Qinetiq
Optical characteristics:
Colour INFRARED 850nm – Visual RED 40cd – Horizontal beam 360° – Vertical radiation pattern -15° – +30° – Typical intensity 300mW/sr, Peak 600mW/sr
Electrical characteristics:
Operating voltage 24VDC – Constant current PFC – 15W power consumption best in industry –
Meets: EMC (Emissions): EN 61000-6-4 – EMC (Immunity): EN 61000-6-2
Mechanical characteristics:
Marine grade aluminium body (C5MHigh) – Degree of protection IP66, Height 200mm, diameter 140mm, Weight inc mounting set 3.4kg.
Additional Factory-Installed Options:
Visual Red
Independent Verification:
Qinetiq, Finas, Aalto University, Nemko
CEL-LIR
Robust Small Form Intelligent Visual Red and Infrared Light is fully compliant to ICAO, EASA, DIO and FAA and 850nm Night Vision Compatible.
Marine grade lights offer built-in Modbus intelligent network integration, photocell & flasher modes, fault monitoring etc
More Information
Key Features:
10 & 32cd (effective) RED fixed or flashing – Supports both stand-alone and
Modbus operations – Suitable for offshore use – Marine Grade with A316 end
parts – Extremely reliable – design lifetime 20 years – 5 year warranty –
longest in the industry
Specifications met:
ICAO, EASA, FAA, DIO – verified Qinetiq, Finas, Intertek
Optical characteristics:
– 10cd fixed or flashing, – 32cd fixed or flashing, – Colour aviation RED, –
Horizontal radiation pattern 360°, – Vertical radiation pattern >10°, –
Infrared wavelength 850nm (>25 mW/sr) – Total Radiant Flux 440mW
Electrical characteristics:
Operating voltage 100-240VAC – Operating voltage 10-60VDC – Constant current
PFC – Up to 4W power consumption best in industry
Meets: EMC (Emissions): EN 61000-6-4 – EMC (Immunity): EN 61000-6-2
Mechanical characteristics:
Marine grade aluminium body (C5MHigh) – Degree of protection IP66, Height 255mm,
diameter 104mm, Weight 1.1kg.
Independent Verification:
Qinetiq, Finas, Aalto University, Nemko
LOW INTENSITY TOWER LIGHTS
CEL-LIT32-AC230
CEL-LIT32-AC230
More Information
CEL-LIT32-AC230
Key features
– Based on LED technology – Suitable for Offshore environment – “Through-the-wall” tower marking solution; i.e. pin light – Supports both stand-alone and RS-485 Modbus operations
– Built-in photocell – Built-in fault monitoring – Can also be controlled with voltage signals
– Design lifetime more than 20 years – 5-year warranty – Option for 10-year warranty, the longest in the industry
Electrical characteristics
– AC models: Nominal 115 or 230VAC – DC voltage range: 10 – 60 VDC – Rated current: ≤ 1A – Built-in overvoltage protection – Power consumption starting from 2W upwards – Alarm relays – RS-485 Modbus – Overvoltage Protection
Optical characteristics
– 10cd Type A – 32cd Type B fixed – 32cd Type E – 50cd for the Netherlands – Colour aviation RED – NVG compliant infrared (850nm) – According to ICAO Standards and Recommended Practices
Mechanical characteristics
– Operating temperature range -40…+55 °C – IP66 protection degree – Marine-grade aluminium – Rubber light and wall seal – Spirit level inside to assist mounting
OFFSHORE HELICOPTER HOIST LIGHT
CEL-MI-HHS-CAP437-AC-XX
Offshore Helicopter Hoist Light
Helicopter hoist status light is used to indicate to the helicopter operator that the turbine blades and nacelle are safely secured in position prior to helicopter hoist operations commencing. It is capable of displaying both Steady and Flashing (120FPM) green signal. The product offers unique features such as incorporated fault monitoring, photocell, GPS synchronisation, and it supports both stand-alone and Modbus operations as part of
an Obelux aviation light system network.
More Information
Key features
– Day and Night modes can be set via I/O, RS-485 ModBus or SCADA – Based on LED technology – 750cd GREEN steady burning or flashing – Supports both stand-alone and RS-485 Modbus operations – Suitable for Offshore environment – Built-in GPS synchronisation – Built-in photocell – Built-in cold climate version (CCV), temperature controlled heater – Built-in fault monitoring – Dry contact alarm relay – Visibility sensor luminous output levels 10%, 30% and 100% – Hot start for radar-controlled systems – Easy to chain (no need for junction box) – Embedded Web Server – Design lifetime more than 20 years – 5-year warranty -Option for 10-year warranty, the longest in the industry
Specifications met
– CAP 437 – Standards for Offshore Helicopter Landing Areas, Edition 8 December 2016 (Appendix J) Amendment 01/2018 September 2018
– ICAO Annex 14 Volume 1 Appendix 1, Colours aeronautical ground
Lights
Optical characteristics
– Colour aviation GREEN – Steady and Flashing modes – Flash rate 120FPM (duty cycle less than 50%) – Horizontal beam 360° – Vertical beam characteristics
Electrical characteristics – continued
– Operating voltage (AC): 100-240VAC, 50Hz / 60Hz – Operating – Flash rates: 120fpm (2Hz). – Meets standards EMC (Emissions): EN 61000-6-4 EMC (Immunity): EN 61000-6-2
– Power consumption for ICAO AC/DC versions (excluding CCV consumption)
– 45W @ Day (GREEN, 120fpm) – Recommended cables (Outdoor) for AC versions:
– Power (L-N-PE): 3×1,5mm² shielded 3×2,5mm² – Power + Data/ Relay: 6 x1,5mm² or 6×2,5mm² shielded
Mechanical characteristics
– Anodised, marine grade aluminum body and end parts – AISI 316 acid-proof stainless-steel screws – Glass dome – Degree of protection IP66 – Operating temperature range -40…+55°C
– Storage temperature range -40…+55°C – Height 347mm, width 160mm – Weight 4,3kg (without mounting set) – Easy to chain via Data cable and via Power cable (no need for junction box)
– 2 x M25 (6-17mm) & 2 x M20 (6-12mm) cable glands
CEL-LC-230-XX
Local Controller (LC) is used for controlling and monitoring a large number of Obelux aviation lights. LC offers full system management for different devices, such as lights and visibility sensors which are connected to the same network. LC offers user-friendly colour LCD screen for accessing the system locally.
Contact us for more information
